Thank you for purchasing our product.
Before installing wheels, please read this instruction manual carefully to ensure proper safety and performance of the wheels.
We recommend saving this manual for future reference.
Before installing wheels,please read this manual carefully and explain this manual to your customers.
With incorrect usage, it will cause severe accident that may lead to death or any serious injury.
With incorrect usage, it may cause severe accident that that leads to death or any serious injury.
With incorrect usage, it may cause injury or damage.
|⑨||Center bore diameter|
|⑩||P.C.D.(pitch circle diameter)|
|⑪||Bolt holes diameter|
|⑫||Disc Mounting face|
|⑬||Mount plate diameter|
■Make sure the size and inset of wheels, the bolt pattern, P.C.D.(pitch circle diameter)and shape of mount plate are to be fitted to the vehicle.The wheels cannot be mounted if any of the foregoing attributes are not compatible.
■When installing new tire, please use new specified valve stems because an old valve stem with deteriorated seal may cause air leakage.
■Use the short type valve core(model number JIS type B no.9000).
■There are 2 types of wheels to be installed tire on either in-set or out-set. Install tires according to the type of wheels.
■Always use the lubricant when installing tires on wheels.
■Note that a wheel comes with a 60 - degree taper, spherical,or flat lug nut or bolt seats. Use nuts or bolts that match the shape of the seats.(or use dedicated nuts or bolts as instructecd)
■Check if the nuts or bolts can metch the screw diameter and pitch of the vehicle.
■Use appropriate nuts and bolts for spare wheels,too.
■Tighten nuts or bolts properly with appropriate torque.
■First tighten all the nuts and bolts temporarily with low torque,then make sure to tighten all of them to the appropriate torque evenly. Ex.For 60°degree tapered seat, appropriate torque is as below; M10 screw = 50-70N･m(5-7kgf･m), M12=90-120N･m(9-12kgf･m), M14=160-180N･m(19-18kgf･m). For any additional information,please contact the wheel manufacturer.
【How to tighten bolts】
■Use torque wrench when tightening the nuts and bolts.
■When installing on the vehicle, check all the wheels to make sure there is no contact with the cehicle body when fully turning the steering wheel to the right and left.
■Make sure that tires and wheels should not come out from the fenders, which is prohibited by law.
■Lug nuts and bolts come loose after initial installation or rotation, so retighten them to the appropriate torque setting after adiving approximately 100km(60miles) of use.
■Make sure that nuts and bolts are well-tightened in a daily maintenance.Center cap,center cover and lock-screw of those covers are as well.
■Aluminum alloy wheels are susceptible to corrosion when they are exposed to salt or mud. Therefore, wash them with water after driving the vehicle on the beach or on a snowy or unpaved road. The use of soft-cloth is suitable when wiping the wheel.
■Using car wash equipment could scratch the wheels. It is the best way to wash by hand. When doing so,be careful with sharp edges, which could be hazardous to your hands.
■When storing these wheels/tores for a prolonged perid of time,protect them from direct sunlight, rain, oil, moisture, fumidity and high temperature.
■Uninstalled tire wheels should have 1/2 of tire air pressure of standard use and been kept in storage.
■When re-installation, always check its tire pressure to the recommended level, wheel balance, and nuts and bolts tightended to the appropriate torque.
JWL, JWL-T and VIA Standard
The aluminum wheels are in compliance with the Japan Light Alloy Wheel(JWL)or Japan Light Alloy Wheel Truck & Bus(JWL-T) standard, and have passed the tests conducted by the Vehicle Inspection Association(VIA). To ensure the proper safety and performance of the wheels, please follow this instruction carefully. For any additional information, contact the dealer where you purchased the products.
Japan Light Alloy Wheel standard is the safety standard that applies to light alloy wheels for passenger cars(excluding cars carrying 11 or more people, motorcycles, and motorcycles with side cars). The tests prescribes by this technical standard are carried out at the responsibility of the manufacturer themselves and wheels that confirm to the standard are labeled with the JWL mark.
Japan Light Alloy Truck & Bus standard is the safety standard that applies to light alloy wheels for trucks and buses.The tests prescribed by this technical standard are carried out at the responsibility of the manufacturer themselves and wheels that conform to the standard are labeled with the JWL-T mark.
A Third-party entity called the Vehicle Inspection
Association verifies whether a product meets the requirements prescribed by the JWL or JWL-T standard.This association permits a product to bear a VIA mark if it passes rigorous quality and strength verification tests conducted in accordance with the JWL or JWL-T standard.
This limited warranty covers every WORK brand wheels and related accessories against defects in manufacturing material and workmanship under normal and reasonable use. This warranty applies only to the original purchaser and may not be transferred.
During those guaranteed period listed below,if the wheel becomes unserviceable due to a covered manufacturing defect,we will repair any faulty workmanship without charge, and either repair or replace, at our option.
|3years||Function of wheels excluding the accessories listed bellow.|
|1year||Accessories such as valve,center cover, center cap,and logo ornament.|
Surface finish of wheels including Chrome, Paint,and WORK METAL COAT.
Corrosion and Stains on the wheel.
All warranty claim must be presented to an authorized dealer of WORK wheels or to WORK COMPANY LIMITED if purchased directly.
All products that are returned either for repair or replacement are subject to inspection by manufacturer prior to the final decision.
1.Wear and tear from long term use;such as the fading of paintings,chrome plating,and WORK METAL COAT on surface of wheels and accessories.
2.Sensuous phenomenon which does not give bad effect on driving performance;recognized as feeling of driving which is caused mostly by miss-adjusting wheel balance.
3.Defects become worse by being left or neglected.
4.Defects resulting from violation or neglect of rules and cautions listed on this manual.
5.Defects resulting from alteration, modification or repairs by other than WORK COMPANY LIMITED.
6.Defects resulting from installation on vehicle which is altered or modified illegally.
7.Defects resulting from improper maintenance or no maintenance at all.
8.Defects resulting from installation of improper wheel(ex.sizes or the like)to the vehicle.
9.Defects resulting from installation of incorrect tire size.
10.Defects resulting from wrong use of mounting parts;such as nuts,bolts,spacers,hubrings or the like.
11.Defects resulting from external factor such as harsh cleaning chemicals or abrasives, roadway chemicals andhazards and adverse weather.
12.Defects resulting from natural calamity such as damage of earthquake,storms,floods and fire or any accident and acts of God.
13.Defects resulting from mis-operation of mounting on/off tires and balancing.
14.Defects resulting from use at competitive events or use off road.
15.Claims without any proof of purchase or of original owner.
16.Any cost for replacement or repair by a dealer or a shop not authorized by WORK COMPANY LIMITED.
17.Any cost resulting from inconvenience and loss occurred during replace or repair;such as telephone, rent-a-car, hotel,transportation,new tires,compensation for loss of sales,business chance and closed days and etc.
18.Defects resulting from the installation in excessive or uncovered vehicle load.